BRAZING PRODUCTS FOR ALUMINIUM

At TurboBraze we understand that brazing aluminium presents its own set of problems, so we have developed a range of products to make the task easier. In our range we offer brazing pastes and fully dispensible fluxes, both flouride and chloride based.

Brazing Paste
Aluminium brazing pastes are suitable for automated, semi-automated and furnace brazing processes. the pastes are typically 40% alloy powder and can be supplied with either chloride or flouride flux to suit specific applications.

Alloy
Code
Composition Solidus/
Liquids ºC
Standards
Al Cu Si BS EN 1044:1999
718 88 - 12 575 - 585 AL 104
716 86 4 10 520 - 585 AL 201

Dispensable Fluxes
We have developed a range of fully dispensable aluminium fluxes to suit most applications. The fluxes all have the following advantages.

Versatile The fluxes work equally well with torch, induction and furnace brazing.
Environmentally Friendly The fluxes do not contain any solvents or hydrocarbon producing rubber and are completely water soluable, so cleaning equipment requires no solvents, just water.
Ease of Application The flux can be adjusted for dispensing, srpaying, brushingm dipping and squeeze bottle applications.
Cost Cutting The flux is highly concentrated and with the use of dispensing systems, flux consumption can be cut by up to 50%

Chloride Fluxes

Alloy
Code
Composition Solidus/
Liquids ºC
Standards
Al Cu Si BS EN 1044:1999
718 88 - 12 575 - 585 AL 104
716 86 4 10 520 - 585 AL 201

As with all chloride based fluxes, the residues remain corrisive and must be removed. With the AL-DC series, all residues are removed with a simple water wash.

Flouride Fluxes

Alloy
Code
Composition Solidus/
Liquids ºC
Standards
Al Cu Si BS EN 1044:1999
718 88 - 12 575 - 585 AL 104
716 86 4 10 520 - 585 AL 201